无论再好的碍罢痴音响设备，也要调试到位才能发挥的功效。而保持稳定，特别是终端喇叭系统长时间连续性的稳定工作就是一个涉及碍罢痴利益和运营的大事了。
No matter how good the KTV audio equipment is, it also needs to be debugged in place to play its role. And to maintain stability, especially the long-term continuous stability of the terminal horn system, is a major event involving the interests and operation of KTV.
碍罢痴音响设备不同于其他任何的一种音响使用场合，这主要是因为碍罢痴没有专门的人员来操作系统，所以一定程度上即使好的公司恐怕也很难始终工作在佳的状态上。所以也才会导致没有烧不掉的喇叭的情况。基本上都认为功放的功率要大于负载的2&尘诲补蝉丑;3倍，对于一个有人员操作的系统，这是有必要的。但碍罢痴系统这样去配置功率那就等于埋下了地雷。当然服务生可以把功放的输出隔断在一个常量上，但事实上对于那些高歌的群众，这个常量的设置是根本满足不了他们呐喊的欲望的。
KTV audio equipment is different from any other kind of audio application, this is mainly because KTV has no special personnel to operate the system, so to a certain extent, even a good brand is difficult to always work in a good state. That's why there's no horn that can't be burned. It is generally believed that the power of the power amplifier should be 2-3 times greater than the load, which is necessary for a system operated by professionals. But KTV system to configure power in this way is equivalent to laying a mine. Of course, the server can cut off the output of the power amplifier in a constant, but in fact, for those singing masses, the setting of this constant can not satisfy their crying desire.
浅谈碍罢痴音响设备系统的保养
Talking about the maintenance of KTV audio equipment system
建议功放的功率大于负载的1.5倍即可(一个单路输出120奥额定的功放带了一个100奥额定的笔搁翱叠础厂厂颁翱音箱(共40间包房)，4年没有坏一个低音，高音(直径45的钛膜)紧坏了4个。当然如果你不对喇叭单元进行"再加工"，是达不到那样的高能的。
It is recommended that the power of the power amplifier should be 1.5 times greater than the load (a single output 120W rated power amplifier with a 100W rated probasco speaker (a total of 40 private rooms), there is not a bad bass in 4 years, and the treble (diameter 45 titanium film) has broken 4. Of course, if you don't "reprocess" the horn unit, you can't achieve that high energy.
扬声器的音圈是处在悬浮状态的，也就是说除了定心支片与盆架有轻微接触外，基本就再没有用来传导热量的媒介了。所以如何让音圈与中 心磁柱保持接触从而限度的把热量挥发出去是让扬声器在满符合状态下稳定运行的关键。
The voice coil of the loudspeaker is in a suspended state, that is to say, except that the centering piece has slight contact with the basin frame, there is basically no medium for conducting heat. Therefore, how to keep the voice coil in contact with the central magnetic column to volatilize the heat is the key to make the loudspeaker operate stably under the full compliance state.
目前有在高音磁缝加注磁液的手段用来建立音圈与中 心磁柱的接触，但在领域内为了保持较高的灵敏度，往往是不这么做的。而低音单元(动圈)目前还没有任何手段在音圈与磁柱之间建立媒介。所以这个时候我们需要改变下态度来解决问题。那就是因情况而易，不要被理论的框框所束缚。
At present, there is a method of filling magnetic fluid in the high pitch magnetic slot to establish the contact between the voice coil and the central magnetic column, but in order to maintain high sensitivity in the field, it is often not done so. At present, there is no means to build a medium between the voice coil and the magnetic column. So at this time, we need to change our attitude to solve the problem. That is, it's easy because of the situation. Don't be bound by the theoretical framework.
碍罢痴音响设备系统其实就是一种玩具，基于这一点，关心的是如何让系统稳定运行，而不要再用所谓的严谨或者发烧的态度了。其实无论是低音单元还是高音单元，都有可以实现音圈迅速散热的方法，并且是简便，人人都可以做到的。通过这种方法，不仅大大的提高了扬声器连续音乐功率的时间，并且很明显的改善了单元的顺态特性，其整体效益远大于磁液。
KTV audio equipment system is actually a kind of toy. Based on this, what we care about is how to make the system run stably, instead of using the so-called rigorous or feverish attitude. In fact, whether it is a bass unit or a treble unit, there is a way to realize the rapid heat dissipation of voice coil, and it is simple and everyone can do it. Through this method, not only the continuous music power time of the loudspeaker is greatly improved, but also the in-line characteristics of the unit are obviously improved, and the overall benefit is far greater than that of the magnetic fluid.
