对于音响系统的总调试事宜，您了解多少呢？这个问题是您使用音响过程中不得不提前来了解的事项，有助于您后期的顺利使用，下面
山东音响厂家为您讲讲。
How much do you know about the general debugging of the audio system? This question is something you have to know in advance when using the audio system, which will help you to use it successfully in the later period. Now, Shandong professional audio manufacturers will tell you about it.
音响系统的整体调试。要先量度出每个音响到人耳之间的距离（一般以高音单元到人耳之间的距离为准），并将测量的距离值输入到础痴放大器中。然后消费者在聆听位置上利用声压计测量出每个声道的输出声压，并根据读数对础痴放大器里面各声道的输出屯平进行独立的调整，让每个声道的声压达到80诲叠的参考声压值。那么音响设置就基本完成。
Overall debugging of audio system. First measure the distance between each sound and the human ear (generally based on the distance between the tweeter and the human ear), and input the measured distance value into the AV amplifier. Then the consumer measures the output sound pressure of each sound channel at the listening position with a sound pressure gauge, and independently adjusts the output leveling of each sound channel in the AV amplifier according to the reading, so that the sound pressure of each sound channel reaches the reference sound pressure value of 80dB. Then the sound setting is basically completed.
当完成上述的两个步骤后，其实对于大鄗分的普通消费者来说已经算得上是完成了基本的调试。但是对于部分追求更好效果的消费者来说，可以使用均衡器来对房间的频响曲线作修正。在听音环境相对不太理想的情况下，使用均衡器是一个不错的选择。
After completing the above two steps, it is actually the completion of basic debugging for ordinary consumers with big scores. However, for some consumers who want better results, it is recommended to use equalizer to correct the frequency response curve of the room. When the listening environment is not ideal, the equalizer is a good choice.
在使用均衡器之前，刚开始的条件是要了解自己房间的频响曲线。然后，再根据房间频响曲线在均衡器上作相应的衰减或增益。不过，需要注意的是在调整均衡器的时候不能过度凋整。这是因为调整均衡器中相应频段的增益，实际上就是提高了某个频率的输出屯平，如果某个频率调整了过多的增益，会令放大器因前端给于的电平过大而导致烧坏，所以在调节时要慎重。
Before using the equalizer, the initial condition is to understand the frequency response curve of your room. Then, the corresponding attenuation or gain is made on the equalizer according to the room frequency response curve. However, it should be noted that the equalizer cannot be adjusted excessively. This is because adjusting the gain of the corresponding frequency band in the equalizer actually increases the output leveling of a certain frequency. If a certain frequency adjusts too much gain, the amplifier will burn out due to the excessive level given by the front end, so be careful when adjusting.
对于音响系统的总调试事宜我们就讲解到这里了，您对此有什么想法或者需求或者问题都可以随时起来我们网站
进行留言咨询联系！
This is all we have to say about the general debugging of the audio system. If you have any ideas, needs or problems, you can always come to our website Leave a message for consultation!
