不同的会议室需要不同的会议音响。那么我们怎样来选择会议音响呢？使用会议音响的标准又是什么呢？跟随山东会议室音响来看看吧！
Different conference rooms need different conference acoustics. So how do we choose the conference sound? What is the standard of using conference sound? Follow the Shandong conference room audio to have a look!
1.山东专 业音响小型会议室
1. Shandong professional audio small conference room
小型会议室一般20到50左右，会议室参会人员较少，一般可容纳3-20人左右，对于音响设备没有严格的要求，在会议室前端两侧悬挂两只专 业音响即可。专 业音响融合了新颖的外观设计理念以及独特的工艺设计理念，语音清晰、饱满、原音播放，声音穿透力强等特点，箱体采用加强 效果的中密度纤维板.
A small conference room is generally about 20 to 50 square meters. There are few participants in the conference room, which can generally accommodate about 3-20 people. There is no strict requirement for audio equipment. Two professional audio systems can be hung on both sides of the front end of the conference room. Professional audio combines the new appearance design concept and unique process design concept, with the characteristics of clear and full voice, original sound playing and strong sound penetration. The box is made of medium density fiberboard with enhanced effect
通过对极 端条件下产生箱体震动的吸收，有效提升音箱整体声音效果的稳定性，确保音箱有近乎准确的精度和细节，还原原始现场及展现的宽广音场可覆盖更大的聆听区域，特殊的分频点调节使啸叫点降低，全 面提高人声的效果；音箱性能稳定，可靠耐用，适用范围广，覆盖射程远，声场饱满，频响宽，后场不需要补声音响，或者四只专 业音响，前后各两只即可。
Through the absorption of box vibration under extreme conditions, it can effectively improve the stability of the overall sound effect of the speaker, ensure that the speaker has almost accurate accuracy and details, restore the original scene and show a wide sound field, which can cover a larger listening area. Special frequency division point adjustment can reduce the howling point, and comprehensively improve the effect of human voice; The performance of the speaker is stable, reliable and durable. It has a wide range of application, full sound field and wide frequency response. There is no need to add sound in the back field, or four professional sound, two in front and two in back.
2.山东专 业音响中型会议室
2. Shandong professional audio medium sized conference room
50到80平米的会场，大型会议室参会人员一般在30人左右，对音响设备要求配置比小型会议室高。一般在会议室前端两侧悬挂两只专 业音响。后端根据现场需求配置或不配置补声音响。
In a 50-80 square meter venue, the number of participants in a large conference room is generally about 30, and the requirement for sound equipment is higher than that in a small conference room. Generally, two professional audio systems are hung on both sides of the front end of the conference room. The back end is equipped or not equipped with supplementary sound according to the field demand.
3.山东专 业音响大型会议室
3. Shandong professional audio conference room
大型会议室一般在80~150平间，容纳60人左右。配置音响为前后各两只专 业音响，前端两只作为扩声用，后端两只作为补声用。也可前端两只10寸专 业音响用于扩声，后置两只6.5寸专 业音响用于补声。
Large conference rooms are generally 80-150 flat rooms, which can accommodate about 60 people. There are two professional loudspeakers at the front and back, two at the front end for sound reinforcement and two at the back end for sound supplement. It can also use two 10 inch professional audio systems in the front for sound reinforcement and two 6.5 inch professional audio systems in the back for sound compensation.
4.山东音响超大型会议室、多功能厅。
4. Shandong audio super large conference room and multi-function hall.
超大型会议室、多功能厅由于其不仅仅具有会议功能，还可以举办一些文艺演出活动、单位庆典等，对音效要求更高。基本音响配置为前端两只18寸专 业音响，两只15寸专 业音响，两只6.5寸专 业音响。后场可设置两只15寸或12寸专 业音响进行补声，也可根据情形配置四只专 业音响进行补声。
The super large conference room and multi-function hall not only have the function of meeting, but also can hold some artistic performances, unit celebrations, etc. The basic audio configuration is front-end two 18 inch professional audio, two 15 inch professional audio, two 6.5 inch professional audio. Two 15 inch or 12 inch professional loudspeakers can be set in the backcourt for sound compensation, or four professional loudspeakers can be set according to the situation.
由于专 业音响的配置不仅基于声学，还基于美学，比如放置位置，音响色调、形状与环境的和谐度等，因此一个专 业音响系统设计是否合理，不只是电声系统的设计与调试，而要考虑到实际的声音传播环境，并根据设备和周边环境结构现场去调音。
Because the configuration of professional audio is not only based on acoustics, but also based on aesthetics, such as location, tone, shape and harmony with the environment, whether the design of a professional audio system is reasonable or not is not only the design and debugging of the electroacoustic system, but also the actual sound transmission environment, and the on-site tuning should be carried out according to the structure of the equipment and surrounding environment.
