目前音响设备种类繁多，这么多设备在使用当中难免会有一些各种各样的故障，有些是设备本身的故障（硬故障），有些是使用不当造成的人为故障（软故障）。那么为了更好的保护
山东音响，我们应该杜绝以下几个错误操作：
At present, there are many kinds of audio equipment, so many equipment will inevitably have various faults in use, some of which are the faults of the equipment itself (hard faults), some of which are man-made faults (soft faults) caused by improper use. In order to better protect Shandong Audio, we should put an end to the following wrong operations:
一，音响器材放进柜里；一些音响爱好者处于对音响的保护或者是装饰的作用，将音响器材放进订做的柜里，殊不知这样做，反而会使音响器材易过热，老化。因为柜里的空间有限，没有足够的空气流通，会造成谐振使音色浑浊，功放等器材。
1、 Put the audio equipment in the cabinet; In order to protect or decorate the audio, some audio enthusiasts put the audio equipment in the customized cabinet. However, this will make the audio equipment easy to overheat and aging. Because the space in the cabinet is limited, there is not enough air circulation, which will cause resonance to make the sound turbid, power amplifier and other equipment.
二，器材迭压摆放；一些音响爱好者为了贪图方便，把一些影碟机、放大器、调谐器、数码模拟转换器等机器重迭放置，这就会引起互相的干扰。特别是碟机和功放干扰严重，会使音色偏硬及产生压抑感。为了不引起互相的干扰，应该把器材放在由厂方设计的音响架上。
2、 Equipment is stacked and placed; For convenience, some audio lovers overlap some video players, amplifiers, tuners, digital analog converters and other machines, which will cause mutual interference. In particular, the disc player and power amplifier have serious interference, which will make the tone hard and produce a sense of depression. In order not to cause mutual interference, the equipment should be placed on the sound rack designed by the manufacturer.
叁，插头不分正负；有些音响的爱好者认为插头分不分正负，音响的效果都是一样的。其实不然，电源插头正负处理得好的系统，音色层次分明，自然顺畅；正负不一致，音色会偏硬、粗糙。所以，音响的爱好者们，平时要注意插头的正负插法啦！
3、 Plug does not distinguish positive and negative; Some audio enthusiasts believe that the plug can be divided into positive and negative, and the sound effect is the same. In fact, otherwise, the system with good handling of the positive and negative of the power plug has a clear and smooth tone; If the positive and negative are inconsistent, the tone will be hard and rough. Therefore, audio lovers should pay attention to the positive and negative insertion of the plug at ordinary times!
四，接线处理不当；很多的音响爱好者们可能都会认为接线方面没有什么大不了的，其实其中还是有很大的学问的。例如，接线时不可把电源线与信号线扎在一起，因交流电会影响信号；信号线或喇叭线均不能打结，否则会影响音色；信号线或喇叭线过长要改短；许多信号线都有方向性，不能弄错。所以，爱好者们在接线的时候也要好好的考虑清楚，那些可以扎在一起，那些不可以；那些线需长，那些线需短等等。
4、 Improper wiring; Many audio lovers may think that wiring is no big deal, but there is still a lot of knowledge. For example, when wiring, do not tie the power line and signal line together, because AC will affect the signal; The signal line or horn line shall not be knotted, otherwise the timbre will be affected; The signal line or horn line should be shortened if it is too long; Many signal lines are directional and should not be mistaken. Therefore, enthusiasts should also carefully consider what can be tied together and what cannot be when wiring; Those lines need to be long, those lines need to be short, etc.
五，盲目仿效平衡；有一些的爱好者们在看到其他的爱好者怎样做可以改善到音响的效果的时候，也一样去仿效他人的做法。但仿效之后却没有达到相同的效果。例如，人家用长信号线、短喇叭线效果不错，这是因为其前后极与镭射机都是平衡式的。您的器材不是平衡式的，也去模仿，就难以达到相同效果。
5、 Blindly imitate balance; Some enthusiasts also imitate others when they see how other enthusiasts can improve the sound effect. But the same effect was not achieved after imitation. For example, people use long signal lines and short speaker lines to achieve good results, because the front and rear poles are balanced with the laser. Your equipment is not balanced, and it is difficult to achieve the same effect by imitating it.
音响使用中常见的错误操作分析就讲解到这里了，您对此有什么理解，可以随时来我们网站
进行咨询！
This is the analysis of common misoperation in the use of audio. If you have any understanding of this, you can come to our website at any time Consult!
