会议音响调试有许多技巧性的操作，如果只是简单的将设备连接在一起，是达不到预期好的效果的。例如会议进行中声音过大过小，同时有噪音或是断断续续，将使会议效果大打折扣。下面小编就来简单介绍下会议音响布局调试的简单操作步骤，让大家基础了解下前期调试音响设备的重要性。
There are many technical operations in conference audio debugging. If you simply connect the equipment together, it will not achieve the desired effect. For example, if the sound is too loud or too low, and there is noise or intermittent during the meeting, the effect of the meeting will be greatly reduced. The following is a brief introduction to the simple operation steps of conference audio layout debugging, so that you can understand the importance of debugging audio equipment in the early stage.
检查会议音响系统是否连接正确
Check that the conference audio system is connected correctly
系统的正确连接是会议音响调试的基础。按照系统配置连接图纸，仔细检查线路连接及供电系统，预设音响设备的功能按键，保证麦克风电源充足。
The correct connection of the system is the basis of conference audio debugging. According to the system configuration connection drawing, carefully check the line connection and power supply system, preset the function keys of the audio equipment, and ensure that the microphone power supply is sufficient.
调整会议音响设备布局方式
Adjust the layout of conference audio equipment
会议音响的布局策略要根据实际的场地进行规划，以解决场景的痛点问题，同时让音响扩声效果达到佳。一般会议音响布局方式是主扩音箱应当摆放在会议主席台两侧，分体式音箱中低音音箱在下，中音音箱于中间，高音音箱放在上。两侧音箱的辐射区如果相呼应，则大大提高音响质量。避免在音箱上放盆栽植物、台灯或瓷器雕像等，以免造成不必要的损失或者影响会议音响扩声效果。
The layout strategy of conference audio should be planned according to the actual site to solve the pain point problem of the scene, and at the same time to achieve the best sound reinforcement effect. The general layout of conference sound is that the main loudspeaker should be placed on both sides of the conference podium, the split-type loudspeaker with the bass speaker at the bottom, the mid-range speaker at the middle and the tweeter at the top. The sound quality will be greatly improved if the radiation areas of the speakers on both sides echo each other. Avoid placing potted plants, table lamps or porcelain statues on the speakers to avoid unnecessary losses or affect the sound reinforcement effect of the conference.
会议功放设置电平大
The setting level of conference power amplifier is high
在确定系统以及硬件设备正常后，连接设备电源，打开音频功率放大器，并将电平设置在大。将调音台输入增益到调音台指示表为0分贝，缓慢推起调音台输出推子，根据音箱中声音的大小而调整推子，以达到好的音响音量。为保证调试效果好，建议使用相位仪检测器检查每只音箱是否同相。
After confirming that the system and hardware equipment are normal, connect the equipment power supply, turn on the audio power amplifier, and set the level to high. Adjust the input gain of the mixer to 0 dB on the indicator of the mixer, slowly push up the output pusher of the mixer, and adjust the pusher according to the size of the sound in the speaker to achieve a good sound volume. To ensure a good debugging effect, it is recommended to use a phase meter detector to check whether each speaker is in phase.
会议室音响的前期调试是尤为重要的。这需要的知识理论和实操经验技巧才能达到好的会议音响效果，需要根据应用场地的真实环境来进行策略布局，同时解决一些空间声学问题。会议音响调试是一项需要耐心和细心的工作，这需要工程师反复调试，已达到理想的效果。音响工程师也可以为您带来更好的音响设备调试建议，同时搭配上面介绍的音响调试四步曲，相信再借助的调试仪器，同时熟练掌握一定的空间建筑声学知识，一定能调试出达到悦耳、自然会议音响效果!
The early commissioning of conference room acoustics is particularly important. This requires professional knowledge, theory and practical experience skills to achieve good conference sound effect. It needs to make strategic layout according to the real environment of the application site, and solve some space acoustic problems at the same time. Conference audio debugging is a work that requires patience and care, which requires engineers to debug repeatedly, and has achieved the desired effect. The sound engineer can also bring you better suggestions for sound equipment debugging. At the same time, with the four steps of sound debugging described above, I believe that with the help of professional debugging instruments, while mastering a certain amount of knowledge of space architecture acoustics, we will be able to debug to achieve pleasant and natural conference sound effects!
会议想要高能效沟通，会议音响系统是必不可少的。多数人以为的音响调试就是把话筒、扬声器、调音台和功放连接在一起，就&濒诲辩耻辞;万事大吉&谤诲辩耻辞;了，实则不然。以上就是问题的相关内容，有什么疑惑或者需求就来我我们网站
咨询！
The conference audio system is essential for high-efficient communication. Most people think that the sound debugging is to connect the microphone, speaker, mixer and power amplifier together, and then "all is well", but it is not. The above is the relevant content of the question. If you have any doubts or needs, please come to our website consulting service
