在舞台灯光调试过程中，常会遇到灯光铺设不均匀、灯光失控等问题，现结合我们多年的从业经验，把经常遇到的问题做了汇总并提供常规的解决办法，下面
山东舞台灯光厂家为您分析。
In the process of stage lighting debugging, we often encounter problems such as uneven lighting laying and out of control lighting. Now, combined with our years of experience, we have summarized the problems we often encounter and provided conventional solutions. The Shandong stage lighting manufacturer will analyze them for you.
1、灯光铺设不均
1. Uneven lighting
在舞台布光时，灯具数量明明很多，布置的灯光总有阴影区，铺设不均匀。主要有叁种起因：一，灯排数过少灯具摆放分布不均匀；二灯具光束角度过小；叁，灯具位置过低。
During stage lighting, the number of lamps and lanterns is obviously large, and the lighting arrangement always has a shadow area, which is uneven. There are three main causes: first, the number of lamp rows is too small, and the lamps are unevenly placed; 2 The beam angle of the lamp is too small; 3、 The lamp position is too low.
解决办法
terms of settlement
1、在设计时要明确清楚舞台尺寸及舞台上方灯具可摆放位置的高度；
1. During the design, the size of the stage and the height at which the lamps can be placed above the stage shall be clearly defined;
2、根据舞台照度及效果需求，选择合适的光束角度的灯具；
2. According to the requirements of stage illumination and effect, choose the lamps with appropriate beam angle;
3、根据舞台的高度及灯具光束角度距离，计算灯具之间的距离与数量；
3. Calculate the distance and number of lamps according to the height of the stage and the beam angle distance of lamps;
4、后:确实没法改变灯具位置和光束角度，交叉调节各个灯排上灯具的投射角度，也可达到目的。
4. Rear: It is really impossible to change the lamp position and beam angle, and cross adjust the projection angle of lamps on each lamp row, which can also achieve the goal.
2、舞台灯具失控
2. Stage lamps out of control
在所有灯光安装完毕后，灯具拨码没有问题，出现灯光失控的问题。主要原因有叁个：一，信号控制线路问题；二，电脑灯具的灯库出现问题；叁，不同种类的灯共用一根控制线。
After all the lights are installed, there is no problem with the lamp dialling, and the light is out of control. There are three main reasons: First, the problem of signal control circuit; 2、 There is a problem with the lamp library of computer lamps; 3、 Different types of lamps share one control line.
解决办法
terms of settlement
1、检查灯具的拨码没有问题；
1. Check that the dial code of the lamp is correct;
2、检测信号控制线是否断路；
2. Detect whether the signal control line is open circuit;
3、检查信号控制线连接头焊接是否有问题；
3. Check whether there is any problem in the welding of the signal control line connector;
4、一根信号控制线共用灯具数量不宜过多，好一排灯一根控制线；
4. The number of lamps shared by one signal control line shall not be too large, and one control line for each row of lamps shall be provided;
5、信号控制线不宜过长，增加信号分配放大器；
5. The signal control line shall not be too long, and the signal distribution amplifier shall be added;
6、联系厂家确认灯库是否正确；
6. Contact the manufacturer to confirm whether the lamp library is correct;
7、一根信号控制线控制同一种灯，尽量不要共用多种不同类型的灯具。
7. One signal control line shall control the same type of lamp, and multiple lamps of different types shall not be shared as much as possible.
舞台灯光铺设不均匀以及灯光失控的处理相关内容就在上面为您讲解到了，您对此有什么想法或者需求可以随时来我们网站
了解！
The handling of uneven stage lighting and out of control lighting is explained above. You can come to our website at any time if you have any ideas or needs Understand!
