在一场表演中，舞台灯火控台归于整个灯火体系的控制设备，是整个流程的"大脑",因此在运用保护方面需要十分注意，下面
山东舞台灯光厂家给大家介绍舞台灯火知识之灯火控台的运用与保护保养注意事项。
In a performance, the stage lighting console belongs to the control equipment of the whole lighting system and is the "brain" of the whole process. Therefore, great attention should be paid to the application and protection. Next, Shandong stage lighting manufacturer will introduce the application, protection and maintenance precautions of the stage lighting console.
一、数据备份：假如编程过程中或许编好程序后需求离开现场，一定要用鲍盘备份控台数据，否则若控台毛病或遭到人为损坏，情况将不堪设想。
1、 Data backup: If you need to leave the site after programming, you must use a USB flash disk to backup the console data, otherwise if the console is defective or damaged artificially, the situation will be unimaginable.
二、备用控台：任何电子产物都有出毛病的几率，为了避免表演中途出现意外情况，备用一台同型号的控台，把数据别的备份一份。假如条件不允许，备用一个192控台或许240控台也是能够的。
2、 Standby console: Any electronic product has a chance of failure. In order to avoid accidents in the middle of the performance, a console of the same model should be used for backup and a copy of other data should be made. If conditions do not permit, it may be possible to reserve a 192 console or a 240 console.
叁、接地防静电：电子产物运用接地电源是规范的基本要求，尤其是气候枯燥和有地毯的环境下，更简单简单发生大量静电。但是国内实际运用场所，不一定能很好的找到接地电源供电。为了防止控台机体累积的静电，击伤操作人员或许损坏控台芯片，然后导致灯火控台运转紊乱。操作员有必要现场采取简易的接地方法，例如用导电线衔接控台的接地螺丝，导电线另一端用操作台压到地板上等。
3、 Grounding and anti-static: the use of grounding power supply for electronic products is the basic requirement of safety specifications, especially in the dry climate and carpet environment, it is easier to generate a large amount of static electricity. However, it is not always possible to find a good grounding power supply in domestic practical application places. In order to prevent the static electricity accumulated in the console body, the operator may be injured or the console chip may be damaged, which may lead to the disorder of the operation of the lighting console. It is necessary for the operator to adopt simple grounding methods on site, such as connecting the grounding screw of the control console with the conductor, and pressing the other end of the conductor onto the floor with the console.
四、防潮防尘：行业内的一些灯火控台选用的按键内部接触面都是金属的，潮湿的环境很简单导致金属面氧化，令运用过程中按键不灵敏。所以对灯火控制器进行防潮保护显得格外重要。
4、 Moisture proof and dust-proof: The internal contact surfaces of the buttons selected for some lighting consoles in the industry are all metal. The wet environment simply leads to oxidation of the metal surface, which makes the buttons insensitive during use. So it is very important to protect the lamp controller from moisture.
灯火控制器上的推杆是一个非常精准的电子元件，假如长期将控台暴露在外面，很简单使推杆里累积灰尘，直接导致推杆运转数据跳动或许数据不能归零等问题发生。所以许多灯火控台在出厂的时分，都装备了防尘皮套或许布套。在控台不运用的时分，应该尽量盖好防尘布套。
The push rod on the light controller is a very accurate electronic component. If the console is exposed to the outside for a long time, it is easy to accumulate dust in the push rod, which directly leads to problems such as the data pulsation of the push rod operation or the data cannot be reset to zero. Therefore, many light control consoles are equipped with dust boots or cloth covers when they leave the factory. When the console is not in use, the dust-proof cloth cover should be covered as far as possible.
针对分享舞台灯光控台的运用与保护保养问题，我们从四个方面来讲解了这个问题，你对此有什么想法或者需求，就来我们网站
咨询！
With regard to the application, protection and maintenance of the shared stage lighting console, we explained this problem from four aspects. If you have any ideas or needs, please come to our website consulting service
