随着影视音响器材的普及，对视听领域发生兴趣的人越来越多。正确使用这些器材同样重要。就目前来说，在一般音响爱好者中，有一些使用上的误区应该加以避免。
山东音响厂家为您解说。
With the popularization of audiovisual equipment, more and more people are interested in audiovisual field. It is also important to use these equipment correctly. At present, among ordinary audio enthusiasts, there are some mistakes in use that should be avoided. Shandong audio manufacturer explains for you.
一、将器材放进柜里。有人出于装饰和保护，将器材放进定做的柜子里，这会因柜内空间所引起的潜振使音色浑浊，功放等器材由于没有足够的流通空气，易过热、老化。如把音箱装入墙壁，会使声音效果变得生硬。
1、 Put the equipment in the cabinet. Some people put the equipment into the customized cabinet for decoration and protection, which will make the timbre turbid due to the potential vibration caused by the space in the cabinet. The power amplifier and other equipment are prone to overheating and aging due to lack of sufficient circulating air. If the speaker is mounted on the wall, the sound effect will become stiff.
二、迭放器材。很多人爱将影碟机、放大器、调谐器、数码模拟转换器等机器重迭放置，这会引起互相干扰，尤其是镭摄机与功放干扰严重，会使音色偏硬及产生压抑感。正确的做法是将器材放在由厂方设计的音响架上。
2、 Stacking equipment. Many people like to place DVD players, amplifiers, tuners, digital analog converters and other machines on top of each other, which will cause mutual interference, especially the serious interference between the laser camera and the power amplifier, which will make the timbre hard and produce a sense of depression. The correct way is to put the equipment on the sound rack designed by the manufacturer.
叁、电源插头正负不分。电源插头正负处理的好的系统，音色层次分明，自然顺畅;正负不一致或参差不齐，音色会偏硬粗糙。
3、 There is no difference between positive and negative power plugs. The power plug has a good positive and negative processing system, and the timbre is clear and smooth; If the positive and negative are inconsistent or uneven, the voice will be hard and rough.
四、接线不牢与不洁。如果系统音色干硬，其中一个原因可能是接触不良，如插头不牢、接触面氧化、沾上灰尘或油污等，所以应该经常检查，保持接触面清洁。
4、 The wiring is not secure and clean. If the sound of the system is dry and hard, one of the reasons may be poor contact, such as insecure plug, oxidation of contact surface, dust or oil contamination, etc., so it should be checked frequently to keep the contact surface clean.
五、用云石或玻璃承载器材。云石密度低、谐振高，会影响音响效果。玻璃密度比云石高，但却不厚实、谐振更严重。可用花岗石或麻石，尤其是麻石，密度高，承载器材较理想，但厚度要3厘米以上。
5、 Use marble or glass to carry equipment. The low density and high resonance of marble will affect the sound effect. The density of glass is higher than that of dolomite, but it is not thick and the resonance is more serious. Granite or stone can be used, especially stone with high density and ideal bearing equipment, but the thickness should be more than 3cm.
六、音箱的摆放&濒诲辩耻辞;因地制宜&谤诲辩耻辞;。有人因室内先有了其他家具，而将音箱摆放位置迁就家具。正确的应先决定聆听距离，然后将音箱摆到座位与对面墙间的1/3处，音箱的间距为聆听者与音箱直接距离的0.7倍，高度以聆听者耳朵和高音单元齐平为好。
6、 The placement of speakers shall be "adapted to local conditions". Some people have moved their speakers to furniture because they had other furniture in the room first. If it is correct, the listening distance should be determined first, and then the speaker should be placed at 1/3 of the distance between the seat and the opposite wall. The distance between speakers should be 0.7 times the direct distance between the listener and the speaker, and the height should be equal to the listener's ear and the tweeter.
七、接线处理不当。处理接线时不可把电源线与信号线扎在一起，因交流电会影响信号;信号线或喇叭线均不能打结，否则会影响音色;信号线或喇叭线过长可改短。许多信号线都有方向性，不要弄错。
7、 Improper wiring treatment. Do not tie the power line and signal line together when handling wiring, because AC will affect the signal; The signal line or horn line shall not be knotted, otherwise the voice will be affected; If the signal line or horn line is too long, it can be shortened. Many signal lines are directional. Don't make mistakes.
有一些音响使用上的误区应加以避免的问题讲解就到这里了，在这里讲了7个方面的内容，您对此有什么想法或者问题或者需求都可以来我们这里
咨询了解！
There are some problems that should be avoided in the use of the audio system. Here are seven aspects of the content. You can come to us if you have any ideas, problems or needs Ask about it!
