音响是音乐爱好者的心头宝贝，日常使用过程中都是需要保养爱护，如果不好好的对其进行保养的话，那对音响的使用寿命可能就会对大大的缩短。那么要怎样对
山东舞台灯光音响进行保养呢？
The stereo is the heart of music lovers. It needs maintenance and care during daily use. If it is not properly maintained, the service life of the stereo may be greatly shortened. So how to maintain the lighting and sound of Shandong stage?
很多购买了新音响的朋友，通常很兴奋地马上插上电源就试试效果。但是一定要注意了，千万不要在音响没有接驳到功放的时候直接试机，这样会直接冲击功放的电路。可能会得不偿失，所以我们在试机的时候一定要检查所有设备是否都连接完毕，确定好音量调小在启动，如果有发现异样好关机断电，请人员来调试，不要自己开机诊断，避免影响硬件性能。
Many friends who buy a new stereo are usually excited to plug in the power immediately and try the effect. However, it must be noted that do not directly test the machine when the audio is not connected to the power amplifier, which will directly impact the circuit of the power amplifier. The loss may outweigh the gain. Therefore, we must check whether all the devices are connected during the test run, and make sure that the volume is set to low before startup. If there is any abnormality, please ask professional personnel to debug and do not start the machine for diagnosis to avoid affecting the hardware performance.
一般说来，环境温度少应控制在－10℃40℃之间，温度环境尽量避免大的波动。幅度过大的温度变化与在低高环境下使用音响，都会对音响系统造成不可逆的损伤。
Generally speaking, the ambient temperature should be controlled at least between - 10 ℃ and 40 ℃, and the temperature environment should avoid large fluctuations as much as possible. Excessive temperature changes and the use of audio in low and high environments will cause irreversible damage to the audio system.
湿度方面，音响要放置于相对湿度50％80％之间。过于潮湿的环境会使得机内元器件过早失效，或机体内外生锈。此外，电源电压与频率需要与当地的电力相符，长时间让音响工作在非额定电压、频率的电力条件下，也会加速音响的老化。
In terms of humidity, the sound should be placed between 50% and 80% relative humidity. Too humid environment will cause premature failure of components in the machine or rust inside and outside the machine body. In addition, the power supply voltage and frequency need to be consistent with the local power. If the audio works under the power conditions of non rated voltage and frequency for a long time, the aging of the audio will also be accelerated.
在摆放空间的条件上，音响要规避灰尘过多的环境及震动环境。过多的灰尘不仅会封闭散热孔阻隔热量散发，而且进入机体内部后会对具体电路造成破坏。此外音响不论是功放还是音箱，四周都要留出足够的空间，特别是在功放上不要摞置其他设备。
In terms of the conditions of the placement space, the sound system should first avoid the environment with too much dust and vibration. Too much dust will not only block the heat dissipation hole, but also damage the specific circuit after entering the body. In addition, no matter whether it is a power amplifier or a speaker, enough space should be reserved around the stereo, especially do not stack other equipment on the power amplifier.
每个音响的设备都会为其它设备设置有一两个插座，这些插座切记一定要专座专用，不能用来连接其它大功率设备，不然会在使用过程中会系统造成冲击，损坏机体和音响。
Each audio equipment will be provided with one or two sockets for other equipment. These sockets must be dedicated for special seats and cannot be used to connect other high-power equipment, otherwise the system will be impacted and the body and audio will be damaged during use.
音响同样需要保持清洁。清洁音响时不建议使用水来进行擦拭，音响表面以金属材质居多，防水的相对比较少，长时间使用水来进行擦拭，可能会导致外壳的侵蚀，而且水的导电性不能够用来做清洁作用，尽量使用软布进行擦拭，减少对机体的伤害。关注我们
，了解更多！
The audio system also needs to be kept clean. It is not recommended to use water to clean the sound. The sound surface is mostly made of metal materials, and relatively few are waterproof. Long time use of water to wipe may lead to the erosion of the shell, and the conductivity of water cannot be used for cleaning. Try to use soft cloth to wipe to reduce the damage to the body. Follow us Yes, learn more!
