山东音响设备应该如何配置电源呢？配置怎样的电源才是实惠的呢？怎样配置电源才能更加安 全呢？跟随山东音响来了解一下吧！
How should Shandong professional audio equipment be equipped with power supply? What kind of power supply is affordable? How to configure the power supply to be safer? Follow Shandong professional audio to understand it!
1.使用叁相动力电
1. Use three-phase power
一般情况下，为了让音响设备能够正常用电都会安装配置叁相动力电源，如果是非常重要的场合，还应该使用两条独立的叁相动力电源，这样一来，当其中一条叁相动力电源出现故障时，就可以使用另外一条备用的电源，因此，不会导致整个音响系统出现瘫痪。
Generally, in order to enable professional audio equipment to use electricity normally, three-phase power supply will be installed and configured. If it is a very important occasion, two independent three-phase power supplies should also be used. In this way, when one of the three-phase power supplies fails, the other standby power supply can be used. Therefore, Will not cause paralysis of the entire audio system.
2.要和其他电源分开配置
2. It shall be configured separately from other power supplies
电源电压如果不稳定就会对音响设备中的一些精 密元器件造成损坏，从而导致音响设备无法发挥出优良的声音效果，严重情况下还会导致设备的损坏。因此，为了确保音响设备能够使用稳定不受干扰的电源，应该与家中其他灯光以及电器的电源分开来配置。
If the power supply voltage is unstable, it will damage some precision components in professional audio equipment, resulting in the failure of audio equipment to play a good sound effect, and in serious cases, it will also lead to equipment damage. Therefore, in order to ensure that professional audio equipment can use a stable and undisturbed power supply, it should be configured separately from the power supply of other lights and electrical appliances in the home.
3.总电源分配要合理
3. The total power distribution shall be reasonable
在使用音响设备的时候，只有强劲的电源还不够，还应该做好电源的分配。一般情况下，调音台及各种音源设备需要有一路独立的电源，各种周边设备也要有一路独立的电源，此外，功放和其它设备应该有两路独立的电源。而且，每一路独立电源还?使用相应的空气开关来进行控制。
When using professional audio equipment, only strong power supply is not enough, and power distribution should be done well. Generally, the mixer and all kinds of sound source equipment need to have one independent power supply, and all kinds of peripheral equipment should also have one independent power supply. In addition, the power amplifier and other equipment should have two independent power supplies. Moreover, each independent power supply also uses the corresponding air switch for control.
