应该如何配置电源呢？配置怎样的电源才是实惠的呢？怎样配置电源才能更加安 全呢？跟随山东音响来了解一下吧！
Shandong professional audio equipment should be how to configure the power supply? What kind of power supply is affordable? How to configure the power supply to be more secure? Follow Shandong professional audio to understand it!
1.使用叁相动力电
1. Use three-phase power supply
一般情况下，为了让音响设备能够正常用电都会安装配置叁相动力电源，如果是非常重要的场合，还应该使用两条独立的叁相动力电源，这样一来，当其中一条叁相动力电源出现故障时，就可以使用另外一条备用的电源，因此，不会导致整个音响系统出现瘫痪。
In general, in order to make professional audio equipment use electricity normally, three-phase power supply will be installed and configured. If it is very important, two independent three-phase power supply should be used. In this way, when one of the three-phase power supply fails, another standby power supply can be used, It will not paralyze the whole audio system.
2.要和其他电源分开配置
2. Separate from other power sources
电源电压如果不稳定就会对音响设备中的一些精 密元器件造成损坏，从而导致音响设备无法发挥出优良的声音效果，严重情况下还会导致设备的损坏。因此，为了确保音响设备能够使用稳定不受干扰的电源，应该与家中其他灯光以及电器的电源分开来配置。
If the power supply voltage is not stable, it will cause damage to some precision components in professional audio equipment, resulting in the audio equipment can not play a good sound effect, and even lead to equipment damage in serious cases. Therefore, in order to ensure that professional audio equipment can use stable and undisturbed power supply, it should be configured separately from the power supply of other lights and electrical appliances in the home.
3.总电源分配要合理
3. The total power distribution should be reasonable
在使用音响设备的时候，只有强劲的电源还不够，还应该做好电源的分配。一般情况下，调音台及各种音源设备需要有一路独立的电源，各种周边设备也要有一路独立的电源，此外，功放和其它设备应该有两路独立的电源。而且，每一路独立电源还?使用相应的空气开关来进行控制。
In the use of professional audio equipment, only a strong power supply is not enough, but also should do a good job in power distribution. In general, the mixer and all kinds of sound source equipment need an independent power supply, and all kinds of peripheral equipment also need an independent power supply. In addition, the power amplifier and other equipment should have two independent power supplies. Moreover, each independent power supply is controlled by corresponding air switch.
